LENCO SPB-260 Mode D'emploi page 14

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

4.
You can use the remote control for playback music control
(Play/Pause/next/previous track)
5.
During playback, the status LED indicator will be lit continuously. When
the music is paused, the indicator (9) will flash.
AUX-IN 1/AUX-IN 2
Use the 3.5mm AUX-IN jacks to connect your PC, tablet, smartphone or any
other external sound source.
1.
Plug in any device with a 3.5mm output to either of the AUX-1 (2) or
AUX-2 (3) inputs using the AUX cable provided.
2.
Make sure that the unit is plugged in and powered ON .Press the
multifunction control knob (8) several times or press the INPUT button (14)
on the remote control several times until the indicator LED (9) is green
(= AUX 1) or cyan (= AUX 2)
3.
The Playback can only be controlled from your connected external device.
COAXIAL DIGITAL AUDIO INPUT
Use the COAXIAL input (4) to connect a TV or other external sound source with
a coaxial output.
1.
Connect a TV or other source device to the input marked COAX by using
a coaxial cable (not included)
2.
Make sure the unit is plugged in and powered ON. Press the multifunction
control knob (8) several times or press the INPUT button (14) on the
remote control several times until the indicator LED (9) is white.
3.
Adjust the volume by rotating the multifunction control knob (8) or by
pressing the VOLUME + (5)/- (7) buttons on the remote control.
OPTICAL DIGITAL AUDIO INPUT
Use a digital optical cable to connect a TV or other external sound source with
an optical output.
1.
Connect a TV or other source device to the input marked OPTICAL(5) by
using an optical cable (not included).
Note: Some devices require that the optical output feature must be
enabled before use.
2.
Make sure the unit is plugged in and powered ON. Press the multifunction
control knob (8) several times or press the INPUT button (14) on the
remote control several times until the indicator LED (9) is yellow.
3.
Adjust the volume by rotating the multifunction control knob (8) or by
pressing the VOLUME + (5)/- (7) buttons on the remote control.
14

Publicité

Table des Matières
loading

Table des Matières