Table des Matières
Publicité
Hose Suction Control Button
*
2.*
4.
5.*
10
1.
*
3.*
ENGLISH
INSTRUCTIONS FOR USE
•
Before operating the vacuum cleaner, make certain that the dust bag
and filters are in the proper position.
•
Pull all of the power supply cord out from back of cleaner and plug
into electrical outlet.
Note: When pulling on power supply cord watch for a yellow line on
the cord. Then continue slowly pulling on cord till you see the red
line, stop. The red line indicates the end of usable cord.
•
Press the ON/OFF button to switch the appliance on.
•
To rewind the power cord, press the rewind button with your foot,
and guide the cord with your hand to ensure that it does not whip
causing damage.
•
By moving the suction dial control, the suction power can be ad-
justed.
1
The suction control button on the hose handle is used to reduce suc-
tion for delicate work such as cleaning drapes or picture frames.
HOW TO USE
Floors should be cleaned regularly over heavily traveled areas, and once
a week over the entire area. Vacuum slowly, making several passes (for-
ward and backward), covering small areas at a time. The time required to
clean will depend on several factors - including type of floor and amount
of dirt.
Cleaning Tools
Combination Crevice Nozzle/Brush Tool: (stored on tool clip
2
on wand): For crevices, corners, baseboards, between cushions.
Brush rotates to allow use as brush or crevice depending on task.
*on some models.
3
Upholstery Nozzle: (stored on tool clip on wand): For curtains,
draperies, cushions, fabrics. *on some models.
4
Dual Purpose Floor Nozzle: Use foot to change from
hard surface
5
Turbo Brush: For upholstery and for stairs. *on some models.
to carpet setting
Publicité
Table des Matières
