Lindemann Limetree network Mode D'emploi page 23

GETTING STARTED
WLAN operation
To run the device in a WLAN network environment, it must
be logged in there. The easiest way is the "push-button
WLAN
connection" via WPS. Turn on the Limetree NETWORK as described
above. Fix the antenna. Wait until the sample rate LED lights up. Now
press the WPS button on your router until its WLAN LED starts flashing.
Then press the WPS miniature button on the network player until its
WLAN LED starts flashing as well (may vary depending on your router
type). After a short while the successful log-on will be confirmed by the
sample rate LED flashing green. If it lights up red, the above procedure
must be repeated.
With the LINDEMANN app you can also manually enter the security key
of your router. In this case the Limetree NETWORK must be connected
to the network via a LAN cable first. Now click on Settings/Network
Assistant/WLAN/manual in the app and enter all your router data here.
Select the Limetree NETWORK as your playback device under "Devices"
and you're done! The LAN cable is now no longer needed. Select the
desired source and start browsing.
You can either run the device for driving a headphone at the front side
headphone socket or by connecting an amplifier or active loudspeakers
to the rear line output. Switching is done automatically by plugging in
the headphone. If no headphone is plugged in, the line output is active.
Bluetooth operation
The Limetree NETWORK has a Bluetooth function which
allows wireless music playback e. g. from smartphones or
Bluetooth
tablets.
Note: For a Bluetooth audio transmission from a mobile terminal to
the Limetree NETWORK the mobile device must support the A2DP
Bluetooth audio transmission protocol.
To connect your mobile device with the Limetree NETWORK, select the
"Bluetooth" tab in the LINDEMANN app. Now open the Bluetooth set-
tings on the corresponding mobile device and establish a connection
with the the Limetree NETWORK.
You may now close the LINDEMANN app. To return to network oper-
ation, simply cut the connection with the Limetree NETWORK on your
mobile device.
EN 23

Top