User Maintenance - Trixie Andis TR1100 Mode D'emploi

CLIPPER BLADE ADJUSTMENT
The blades on your Andis clipper can be adjusted to any one of four settings from
shorter to longer. To adjust blades, simply move the adjustment lever with your thumb
(Figures A & B).
USING THE ATTACHMENT COMBS
(Some models do not have combs and sizes will vary by kit)
You can set the blades for a longer cut by using any of the attachment combs made for
your Andis clipper. You can attach a comb to the blade in any one of the four positions.
The combs mount easily; simply slip the cutter blade teeth into comb and snap the
comb down. To remove, simply snap off (Figures C & D). These attachment combs gui-
de hair into the blades and give you precise control of hair lengths. The length of trim
is indicated on the attachment comb. Use the chart to find the approximate lengths of
cut. Different blade angles in relation to the skin, thickness and texture of the hair will
vary the cutting length.
Description
Standard Blade TR1100
1/8" Attachment Comb
1/4" Attachment Comb
3/8" Attachment Comb
1/2" Attachment Comb

USER MAINTENANCE

Cleaning and user maintenance shall not be made by children without supervision.
The internal mechanism of your clipper has been permanently lubricated at the
factory. Other than the recommended maintenance described in this manual, no other
maintenance should be performed, except by Andis Company or an Andis authorized
service station.
If the supply cord is damaged it must be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
CLIPPING GUIDE
Clipping Direction
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
With hair grain
Against hair grain
Use & Care Instructions · #23881
Approximate Length of Cut
Blade set to
shortest cut
1/16" (1.6 mm)
1/32" (0.8 mm)
1/4" (6.4 mm)
1/8" (3.2 mm)
3/8" (9.5 mm)
1/4" (6.4 mm)
1/2" (12.7 mm)
3/8" (9.5 mm)
5/8" (15.9 mm)
1/2" (12.7 mm)
Blade set to
longest cut
3/16" (4.8 mm)
1/8" (3.2 mm)
3/8" (9.5 mm)
1/4" (6.4 mm)
1/2" (12.7 mm)
3/8" (9.5 mm)
5/8" (15.9 mm)
1/2" (12.7 mm)
7/8" (22.2 mm)
5/8" (15.9 mm)
11