Safety Guidelines - Definitions; Important Safety Instructions; General Safety - AIRHOSS IT20ASME Mode D'emploi

This manual contains information that is important for you to know and understand. This information
relates to protecting YOUR SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you
recognize this information, we use the following symbols. Please read the manual and pay attention to
these sections.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury and/or property damage.
To reduce the risk of injury to persons, read all the instructions before using the tool. You
must also read the compressor manual and follow all compressor safety instructions.
RISK OF INJURY. Pull the pressure relief valve ring daily to ensure that the valve is function-
ing properly, and to clear the valve of any possible obstructions.
RISK OF BURSTING. Rust can weaken the tank. Drain the condensed water from the
tank after each use to reduce rusting. If a leak is detected in the tank, replace the tank im-
mediately. Do not weld, drill or modify the air tank. Welding or modifications on the air tank
can severely impair tank strength and cause an extremely hazardous condition. Welding or
modifying the tank in any manner will void the warranty.
RISK TO BREATHING/INHALATION HAZARD. Always wear MSHA/NIOSH approved,
properly fitting face mask or respirator and work in a well ventilated area when using
tools that generate dust. Some dust created by power sanding, grinding, drilling and other
construction activities contains chemicals known (to the State of California) to cause cancer,
birth defects or other reproductive harm. Some examples of these chemicals are:
•
•
•
RISK TO BREATHING/INHALATION HAZARD. Do not spray acids, corrosive materials,
toxic chemicals, fertilizers or pesticides. Using these materials may result in death or seri-
ous injury.
RISK TO BREATHING. Never directly inhale the compressed air produced by this tank.
It is not suitable for breathing purposes.
RISK OF INJURY. Never point or spray toward yourself or anyone else or serious skin or eye
injury could occur.
RISK OF EYE INJURY. Always wear ANSI Z87.1 approved safety goggles. Air powered
equipment and power tools are capable of propelling materials such as metal chips, sawdust,
and other debris at high speed which could result in serious eye injury.
WARNING: CONTAINS LEAD. May be harmful if eaten or chewed. May generate dust
containing lead. Wash hands after use. Keep out of reach of children.
WARNING: This product can expose you to chemicals including Lead, which is known to the
State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
RISK OF BURSTING AND/OR INJURY. Check for damaged air hose. Keep the air hose
away from heat, oil, and sharp edges. Inspect the air hose periodically and replace it if it
becomes worn or damaged.
RISK OF BURSTING AND/OR INJURY. Use compressed air regulated to a maximum
pressure at or below the rated pressure of any attachments. Exceeding the maximum
pressure rating of tools or accessories could cause an explosion resulting in serious injury.

SAFETY GUIDELINES - DEFINITIONS

IMPORTANT SAFETY INSTRUCTIONS

* SAVE THESE INSTRUCTIONS *

GENERAL SAFETY

PERSONAL SAFETY
lead from lead-based paints
crystalline silica from bricks and cement and other masonry products
arsenic and chromium from chemically treated lumber.
TOOL USE AND CARE SAFETY
2 - ENG