Bialetti FRL04 Instructions D'emploi page 25

• It may be necessary to switch the appliance off several times in order to
remove food residues from container sides. In this case, switch off and
unplug it.
• Lift the lid and remove eventual remains inside the container by means
of an appropriate palette knife (not supplied).
Keep the spatula well away from blade element to avoid damaging
the cable.
Once having reached the required texture, disconnect the plug from the
•
mains outlet.
• Hold the motor unit (5) with the hand, rotate the graduated container
(3) anti-clockwise and remove it.
• Pour the contents into a suitable container.
This blender may be used for blending cold and hot food. The tem-
perature of the latter must be below 85°c. Do not use frozen or hard
food.
Ingredients can be added by using or removing the measuring cap
(1), Fig. D.
In case the motor does not rotate freely, gradually add small amounts
of liquid or increase the revolution speed. Do not exceed the max.
operating time of 30 seconds.
Warnings:
Never lift the lid (2) while using.
Never insert hands into the graduated con-
tainer (3) whilst the appliance is plugged in.
Prepare the blender graduated container
with the food to process and put it on the
motor unit before plugging the appliance
in. The product was designed to work only
when the graduated container is properly
assembled. In case it does not occur, con-
tact an authorized service centre.
Before removing the lid, wait for the blade
to stop completely.
4. Use
25
EN