Velleman PCUSB11 Mode D'emploi

PCUSB11 – USB 2.0 HUB MULTICARD READER/WRITER, 21 CARD TYPES, HIGH SPEED USB + LIGHT
1. Introduction & Features
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying the PCUSB11! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
The PCUSB11 contains: USB 2.0 HUB and this manual.
Its features are:
• Fully compliant with USB 2.0 specifications and compatible with USB 1.1
• Compliant with EHCI/UHCI/OHCI
• Hi-speed USB 2.0, data transfer rate up to 480 Mbps
• Low power consumption
• 5 LED indicators to indicate POWER ON, USB port 1-4 connected
• Display for company name or logo with blue EL backlight
• Compatible with Win98SE/ME/2000/XP & Mac OS X
• Plug & Play/Hot Swap
2. Specifications
• Bus-powered or through optional adapter
• Lightweight miniature model
• Operating temperature: 0°C to 70°C
• Dimensions: 85 x 35 x 14mm
• Weight: 55g
1. Power
2. Ports 1-4
3. Port 1
4. Port 2
5. Port 3
6. Port 4
7. Power
3. System Requirements
• Pentium II 300MHz or higher including USB 1.1 or USB 2.0 port
• Windows 98SE/Windows 2000/Windows ME/Windows XP/Mac OS X
• CD ROM 24x or higher
ATTENTION: Keep the PCUSB11 out of the sun and away from high current electronic devices.
Do not disassemble or repair the PCUSB11. Contact your retailer if assistance is needed.
PCUSB11 1 VELLEMAN