Change Of Chimney Connection - RAIS/attika Viva Manuel D'utilisateur

English

Change of chimney connection

The stove is delivered ready for top outlet, but may be changed to back outlet in the
following way:
Sample photos
attika
RAIS/ - User manual for RINA-HERA-VIVA-JUNO
Strike out the knock out plate at the rear of stove.
Remove any top plate, baffle plate and smoke chikane.
Remove the blanking plate (3 M6 nuts) and its sealing.
Mount the blanking plate on upper flue outlet hole - be
sure to place the sealing correctly.
It is all screwed together with the 3 M6 nuts.
Mount the flue collar on back flue outlet hole using three
M6x20 cylinder screws and M6 nuts.
Mount the top plate, baffle plate and smoke chikane in
reverse order.
19