RAIS/attika Viva Manuel D'utilisateur page 100

English
Installation of HERA with swivel base
The stove can be fitted with and without a swivel base.
If the stove is supplied with a swivel base, it is mounted below the stove and secured with
2 wing screws (transport safety).
The swivel base can be set to:
• turning 66° (33° to each side) - preset on delivery
• turning 126° (63° to each side)
• turning 360°
Swivel base for 66° turning.
Remove the two screws
and the cover plate.
cover plate
Swivel base for 126° turning.
Move the two screws to these positions.
Check the function of the swivel base.
Remount the cover plate.
18
attika
RAIS/ - User manual for RINA-HERA-VIVA-JUNO
Remove the two wing screws
(transport safety).
Check the function of the swivel base.
The stove can now be turned
to both sides by 33 °.
Swivel base for 360° turning.
Remove the two screws.
Check the function of the swivel base.