General Guidelines - Velleman HQ Power HQPE10009 Mode D'emploi

Indoor use only.
This device is not suitable for ordinary lighting in household room illumination.
Class 3 luminaire.
Power supply polarisation.
3.

General Guidelines

Refer to the Velleman
manual.
All modifications of the device are forbidden for safety reasons. Damage caused
by user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered
by the warranty and the dealer will not accept responsibility for any ensuing
defects or problems.
Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...)
arising from the possession, use or failure of this product.
Keep this manual for future reference.
4. Installation
1. Hold the ceiling bracket at the location where you wish to install the device.
Mark the drilling holes.
2. Drill the holes for the plugs.
3. Fix the ceiling bracket to the ceiling with plugs and screws.
5. Operation
Connect the device to the mains using the included power adapter.
Switch on the device.
Switch off and disconnect from the mains after use. Leave to cool completely
before storing.
V. 01 – 05/10/2017
HQPE10009
® Service and Quality Warranty on the last pages of this
4 ©Velleman nv