Connecting The Speakers - Pioneer GM-A6704 Mode D'emploi

Connecting the units
About suitable
specification of speaker
Ensure speakers conform to the following
standards, otherwise there is a risk of fire,
smoke or damage. Speaker impedance is 2 W
to 8 W, or 4 W to 8 W for two-channel and other
bridge connections.
Subwoofer
Speaker channel
Four-channel output
Two-channel output
Three-channel
Speaker output A
Three-channel
Speaker output B
Other than subwoofer
Speaker channel
Four-channel output
Two-channel output
Three-channel
Speaker output A
Three-channel
Speaker output B
Power
Nominal input:
Min. 60 W (GM-A6704)
Min. 40 W (GM-A4704)
Nominal input:
Min. 190 W (GM-A6704)
Min. 130 W (GM-A4704)
Nominal input:
Min. 60 W (GM-A6704)
Min. 40 W (GM-A4704)
Nominal input:
Min. 190 W (GM-A6704)
Min. 130 W (GM-A4704)
Power
Max. input:
Min. 170 W (GM-A6704)
Min. 80 W (GM-A4704)
Max. input:
Min. 500 W (GM-A6704)
Min. 260 W (GM-A4704)
Max. input:
Min. 170 W (GM-A6704)
Min. 80 W (GM-A4704)
Max. input:
Min. 500 W (GM-A6704)
Min. 260 W (GM-A4704)

Connecting the speakers

The speaker output mode can be four-channel,
three-channel (stereo and mono) or two-chan-
nel (stereo or mono). Connect the speaker
leads based on the mode and the figures
shown below.
Four-channel output
1 Right
2 Left
3 Speaker out A
4 Speaker out B
En
1
3
2
2
4
1