Fantech GDC124CSS Guide D'utilisation page 3

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

How a Dehumidifier Works
The dehumidifier removes moisture from the air by passing the
moist air over a cold dehumidifying coil. The moisture con-
HOW A DEHUMIDIFIER WORKS
denses out of the air on this coil and then drains from the coil
into a bucket.
The dehumidifier removes moisture from the air by passing the moist air over a
How a Dehumidifier Works
A dehumidifier reduces the relative humidity of the surrounding
cold dehumidifying coil. The moisture condenses out of the air on this coil and then
air two ways. The removal of moisture from the air (as just
The dehumidifier removes moisture from the air by passing the
drains from the coil into a bucket.
described) reduces its humidity. The relative humidity of the air
moist air over a cold dehumidifying coil. The moisture con-
A dehumidifier reduces the relative humidity of the surrounding air two ways. The
is further reduced by heating as the dry air is discharged over
denses out of the air on this coil and then drains from the coil
removal of moisture from the air (as just described) reduces its humidity. The
the condenser and out the front. The air is actually heated
into a bucket.
relative humidity of the air is further reduced by heating as the dry air is discharged
several degrees in this process. It is normal for the sur-
A dehumidifier reduces the relative humidity of the surrounding
over the condenser and out the front. The air is actually heated several degrees in
rounding air to slightly increase in temperature as the
this process. It is normal for the surrounding air to slightly increase in temperature
air two ways. The removal of moisture from the air (as just
as the dehumidifier operates.
dehumidifier operates.
described) reduces its humidity. The relative humidity of the air
is further reduced by heating as the dry air is discharged over
the condenser and out the front. The air is actually heated
several degrees in this process. It is normal for the sur-
Evaporator
rounding air to slightly increase in temperature as the
dehumidifier operates.
Humid Air In
Continuous Drain
Connector
Evaporator
Float
Condensate Pump
Humid Air In
Before Calling for Service
Continuous Drain
Connector
Assembly
perform these simple checks
Float
Condition - Unit is not working
Tools Required
Condensate Pump
• Is the dehumidifier connected to a live and correct voltage
electrical supply?
Before Calling for Service
• Is there a blown fuse or tripped circuit breaker? (Check the
perform these simple checks
outlet with another appliance).
• Is the Power Switch pushed to the "I" position?
Condition - Unit is not working
• Is the water container (if used) full and requires emptying?
• Is the dehumidifier connected to a live and correct voltage
• Is the water level plastic float freely hanging inside bucket (if
electrical supply?
Knife
bucket is used), or hangs freely in air (if no bucket)?
• Is there a blown fuse or tripped circuit breaker? (Check the
Parts
outlet with another appliance).
Condition - Moisture Removal Seems Insufficient
• Is the Power Switch pushed to the "I" position?
• Are the dehumidifier's vents and air filter clear of obstructions
• Is the water container (if used) full and requires emptying?
and dirt?
• Is the water level plastic float freely hanging inside bucket (if
• Does the location selected present sufficient airflow around
bucket is used), or hangs freely in air (if no bucket)?
the unit?
Condition - Moisture Removal Seems Insufficient
ASSEMBLY
• Are the dehumidifier's vents and air filter clear of obstructions
and dirt?
Basic Unit (1)
Tools Required
• Does the location selected present sufficient airflow around
the unit?
Unpacking Instructions
Recycle all cardboard and plastic bags. Keep plastic bags out of the reach
ASSEMBLY
of children.
Tools Required
Knife
Parts
Knife
Phillips Screwdriver PH-3
Parts
Basic Unit (1)
Condenser
Condenser
Air Circulating Fan
Dry Air Out
Compressor
Phillips Screwdriver PH-3
Long Tube (2)
Phillips Screwdriver PH-3
Slot Screwdriver
Long Tube (2)
Bent Handle (2)
Bent Handle (2)
Air Circulating Fan
Dry Air Out
Compressor
Unpacking Instructions
Recycle all cardboard and plastic bags. Keep plastic bags
out of the reach of children.
1
Slot Screwdriver
Unpacking Instructions
Recycle all cardboard and plastic bags. Keep plastic bags
out of the reach of children.
1
1
Short Tube (2)
Position up and open top.
3
Position up and open top.
Slot Screwdriver
Position up and open top.
3
3
Cut two vertical corners.
Short Tube (2)
CAUTION: Do not damage unit
Cut two vertical corners.
with knife.
CAUTION: Do not damage unit with knife.
3
Cut two vertical corners.
Bent Handle (2)
Wheel (2)
Wheel (2)
Wheel (2)
Hand Axle (1)
Hand Axle (1)
Hand Axle (1)
Lynch Pin (2)
Lynch Pin (2)
Lynch Pin (2)
2
2
Remove inserts and handle
components.
Remove
4
components.
4
Remove the unit.
Remove the unit.
Wheel Axle (1)
Wheel Axle (1)
Wheel Axle (1)
Screw - Handle (6)
Screw - Handle (6)
Screw - Handle (6)
Washer (2)
Washer (2)
Washer (2)
2
Remove
inserts
and
components.
4
inserts
and
handle
Remove the unit.
3
handl

Publicité

Table des Matières
loading

Produits Connexes pour Fantech GDC124CSS

Ce manuel est également adapté pour:

Gdc124csGdc80cs

Table des Matières