Before Calling For Service - Fantech GDC124CSS Guide D'utilisation

How a Dehumidifier Works
The dehumidifier removes moisture from the air by passing the
CÓMO FUNCIONA UN DESHUMIDIFICADOR
moist air over a cold dehumidifying coil. The moisture con-
denses out of the air on this coil and then drains from the coil
Para eliminar la humedad del aire, el deshumidificador la hace pasar por una espiral
How a Dehumidifier Works
into a bucket.
fría. La humedad del aire se condensa en la espiral y luego desagua en un recipiente.
A dehumidifier reduces the relative humidity of the surrounding
The dehumidifier removes moisture from the air by passing the
air two ways. The removal of moisture from the air (as just
El deshumidificador reduce la humedad relativa del aire circundante de dos formas
moist air over a cold dehumidifying coil. The moisture con-
described) reduces its humidity. The relative humidity of the air distintas. La eliminación del vapor de agua en el aire (tal y como se acaba de
denses out of the air on this coil and then drains from the coil
describir) reduce la humedad. La humedad se reduce aún más por calentamiento,
is further reduced by heating as the dry air is discharged over
into a bucket.
en el momento en el que el aire seco se expulsa al condensador y sale por la parte
the condenser and out the front. The air is actually heated
A dehumidifier reduces the relative humidity of the surrounding frontal. El aire se calienta varios grados durante este proceso. Es normal que el
several degrees in this process. It is normal for the sur-
aire circulante incremente levemente su temperatura cuando el deshumidificador se
air two ways. The removal of moisture from the air (as just
rounding air to slightly increase in temperature as the encuentra en funcionamiento. Este efecto de calentamiento disminuye aún más el
described) reduces its humidity. The relative humidity of the air
efecto de eliminación de humedad.
dehumidifier operates.
is further reduced by heating as the dry air is discharged over
the condenser and out the front. The air is actually heated
several degrees in this process. It is normal for the sur-
rounding air to slightly increase in temperature as the
Evaporador Evaporator
dehumidifier operates.
Entrada de aire
Évaporateur
Humid Air In
húmedo
Continuous Drain Conector de
Evaporator
Connector
drenaje continuo
Float
Flotador
Humid Air In
Condensate Pump
Recipiente
Continuous Drain
Connector

Before Calling for Service

Montaje
Float
perform these simple checks
Condensate Pump Condition - Unit is not working
Herramientas
• Is the dehumidifier connected to a live and correct voltage
electrical supply?
Before Calling for Service
• Is there a blown fuse or tripped circuit breaker? (Check the
perform these simple checks
outlet with another appliance).
Condition - Unit is not working
• Is the Power Switch pushed to the "I" position?
• Is the dehumidifier connected to a live and correct voltage
• Is the water container (if used) full and requires emptying?
electrical supply?
• Is the water level plastic float freely hanging inside bucket (if
Cuchillo.
• Is there a blown fuse or tripped circuit breaker? (Check the
bucket is used), or hangs freely in air (if no bucket)?
outlet with another appliance).
Partes
• Is the Power Switch pushed to the "I" position? Condition - Moisture Removal Seems Insufficient
• Is the water container (if used) full and requires emptying? • Are the dehumidifier's vents and air filter clear of obstructions
• Is the water level plastic float freely hanging inside bucket (if and dirt?
bucket is used), or hangs freely in air (if no bucket)? • Does the location selected present sufficient airflow around
the unit?
Condition - Moisture Removal Seems Insufficient
• Are the dehumidifier's vents and air filter clear of obstructions
ASSEMBLY
and dirt?
• Does the location selected present sufficient airflow around
Unidad básica (1)
Tools Required
the unit?
Instrucciones de desembalaje
ASSEMBLY
Recicle el cartón y las bolsas de plástico. Mantenga las bolsas de plástico
alejadas del alcance de los niños.
Tools Required
Knife
Parts
Knife Phillips Screwdriver PH-3
Parts
Basic Unit (1)
Condensador
Condenser
Condenser
Air Circulating Fan
Dry Air Out
Compressor
Destornillador de estrella (tamaño PH3).
Tubo largo (2)
Phillips Screwdriver PH-3
Slot Screwdriver
Long Tube (2)
Air Circulating Fan Ventilador de circu-
lación de aire
Salida de aire
Rueda cantidad (2)
Dry Air Out
caliente
Compressor
Compresor
Unpacking Instructions
Recycle all cardboard and plastic bags. Keep plastic bags
out of the reach of children.
1
Destornillador de pala.
Unpacking Instructions
Recycle all cardboard and plastic bags. Keep plastic bags
out of the reach of children.
1
1
Tubo corto (2)
Position up and open top.
3
Coloque boca arriba y abra la zona
superior.
Position up and open top.
3
Slot Screwdriver
3
Cut two vertical corners.
Corte dos esquinas verticales.
Short Tube (2)
CAUTION: Do not damage unit
ATENCIÓN: No dañe la unidad con el
with knife.
cuchillo.
3
Cut two vertical corners.
Bent Handle (2)
Bent Handle (2)
Asa curvada (2)
Wheel (2)
Wheel (2)
Hand Axle (1)
Hand Axle (1)
Eje mano (1)
Lynch Pin (2)
Lynch Pin (2)
Pasador rueda (2)
2
Extraiga las sujeciones de cartón y los
componentes de las asas.
Remove
components.
4
Extraiga la unidad.
Remove the unit.
Wheel Axle (1)
Wheel Axle (1)
Eje de rueda (1)
Screw - Handle (6)
Screw - Handle (6)
Tornillos de asa (6)
Washer (2)
Washer (2)
Arandela (2)
2
2
Remove inserts and
components.
4
inserts and handle
4
Remove the unit.
13
handle