VEVOR JHBXG2A Mode D'emploi page 5

13. The unit will heat large objects to forging temperature with the door
open, but it will take a little longer.
14. Never leave the line pressure on when not in use. Always cut the ball
valve and tank valve off for storage.
15. Propane gas has a strong odor. Never continue to run the unit if the
smell of gas is present. Shut the unit down and check all connections with
soapy water for leaks. NEVER use flame to check for gas leaks. Do not
resume use until proper repairs are made by a qualified gas company or
until you contact the manufacturer for assistance.
16. Do not allow the hose to come in contact with hot steel or flames.
17. During operation, the user should always stay in the immediate vicinity
of the forge. Never leave fired forge unattended.
18. When operating your product:Keep handshair and clothing away from
chamber,Do not touch the furnace while in use or until sufficient cooling
time has passed, The forge generates extremely high temperature that can
cause severe burns or afire.
19. Burn Hazard: When using the forge, the surface temperature of the
forge and components will reach up to 600°F. Do not touch any part of the
forge while the forge is heating up or hot. Do not place the forge near a wall
or flammable material. Allow for the forge to fully cool down before
handling.
20. Personal Protection Equipment is required when handling Rigidizer,
Satanite Refractory, and Insulation Blanket during installation.
21. WARNING - Prohibited for minors !
- 3 -