VEVOR JHBXG2A Mode D'emploi page 4

SAFETY INSTRUCTIONS
WARNING:
1. This product is intended for outside use (Use of this equipment without
proper ventilation could result in asphyxiation).
2. Read these instructions carefully before assembling the hose and
regulator units.
3. Wear protective gloves, protective glasses and heat-proof clothing
when using the furnace to avoid burns.
4. Leaking gas can be extremely dangerous.
5. Maintain good ventilation around the equipment to prevent accumulated
smoke and harmful gases from causing damage to the human body.
6. Clean the work area to ensure that there is no debris or flammable
material around.
7. Failure to follow the Cautions and Warnings contained in this assembly
Instruction may result in serious bodily injury or death, or may result in a
fire or an explosion causing damage to property.
8. WARNING-Improper assembly of forge may be dangerous. Follow the
assembly instructions carefully.
9. WARNING-Do not use the forge unless all parts are in place. The forge
must be properly assembled according to the assembly instructions by a
qualified professional.
10. CAUTION! Never under any circumstances should the exhaust ports
be closed off completely on the doors or open endports. This could cause
serious damage and possible body injury.
11. Avoid standing or moving to the front of openings and exhaust ports.
Extremely high temperatures extend approximately two feet from any
openings while in operation. When retrieving obiects from a hot forge
approach it from the side or bottom. A little practice will heln vou acquire a
skill for this procedure.
12. Station the anvil approximately four to five feet to the side of the forge
opening to avoid heat when the forge is in operation.
- 2 -