Technical Specifications - Haussmann PT100114 Guide De L'utilisateur

APPLICATIONS
2) Open the keyless chuck (2) by turning until the bit can be inserted. Then insert
the required bit.
3) Firmly turn the collar of the keyless chuck (2) in clockwise direction by pressing
On/Off switch (8). This automatically locks the drill chuck.
4) The locking is released again to remove the bit when the collar is turned in the
opposite direction.
Battery charging
To charge your tool`s battery,use only the charger and battery pack
(model:J0Z-SP28-1314-1; J0Z-SP28-1318-1) provided with your tool.
Using other batteries can lead to injuries and pose a fire hazard. Details as per
battery charger manual.

TECHNICAL SPECIFICATIONS

Code
Cordless drill/driver
Rated voltage
No-load speed
Max. screw dia.
Max. drilling dia.
Drilling Steel
Capacities Wood
Chuck clamping range
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
WARNING! A battery-operated tool with integral batteries or a separate battery
pack must be recharged only with the specific charger for the battery.
A charger that may be suitable for one type of battery may create a risk of fire when
used with another battery.
1. Avoid accidental starting. Make sure the switch is in the locked OFF position
before inserting the battery pack. Carrying a tool with your finger on the switch
or inserting the battery pack into a tool with the switch on invites accidents.
2. Disconnect the battery pack from the tool or place the switch in the locked OFF
position before making any adjustments, changing accessories, or storing the
tool. Such safety measures reduce the risk of starting the tool accidentally.
3. When the battery pack is not in use, keep it away from other metal objects.
Read the whole manual carefully and make sure you know how to switch the
tool OFF, in an emergency, before operating the tool. Save these instructions
and other documents supplied with this tool for future reference.
22
59595044
PT100114
18V
st
-1 gear 0-400 RPM
nd
-2 gear
0-1300 RPM
5/16" (8 mm)
3/8" (10 mm)
3/8" (10 mm)
1-3/16" (30 mm)
1/32"x3/8"(0.8x10mm)
!
!