Additonal Safety Warnings - Haussmann PT100114 Guide De L'utilisateur

SAFETY INSTRUCTIONS
3. Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories, or
storing power tools. Such safety measures reduce the risk of staring the
power tool accidentally.
4. Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate
the power tool. Power tools are dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power
tool's operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits etc. in accordance with
these instructions, taking into account the working conditions and the
work to be performed. Use of the power tool for operations different from
those intended could result in a hazardous situation.
BATTERY TOOL USE AND CARE
1. Recharge your tool's battery only with the charger specified by the
manufacturer. A charger that is suitable for one type of battery pack may
create a risk of fire when used with another battery pack.
2. Use power tools only with their specifically designated battery packs. Use
of any other battery packs may create a risk of injury and fire.
3. When battery pack is not in use, keep it away from metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, which
can make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
4. Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
SERVICE
1. Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.

ADDITONAL SAFETY WARNINGS

1. Specific safety rules
1) Secure the workpiece. A workpiece clamped with clamping devices or in
a vice is held more secure than by hand.
2) Do not work with materials containing asbestos. Asbestos is
considered carcinogenic.
3) Take protective measures when potentially harmful dust (combustible
or explosive) can develop during working .
Example: Some dusts are regarded as carcinogenic. Wear a dust mask
and work with dust/chip extraction when connectable.
4) Keep your workplace clean. Certain blends of materials are particularly
dangerous. Dust form light alloys can burn or explode.
18