Table Des Matières; Introduction; Owner Responsibility; Product Description - Husqvarna DM700 Manuel D'utilisation

Introduction..................................................................... 2
Safety..............................................................................4
Assembly........................................................................ 8
Operation........................................................................ 8
Maintenance................................................................. 12

Owner responsibility

WARNING: Processing of concrete and
stone by methods such as cutting, grinding
or drilling, especially during dry operation,
generates dust that comes from the material
being processed, which frequently contains
silica. Silica is a basic component of sand,
quartz, brick clay, granite and numerous
other minerals and rocks. Exposure to
excessive amount of such dust can cause:
Respiratory disease (affecting your ability to
breathe), including chronic bronchitis,
silicosis and pulmonary fibrosis from
exposure to silica. These diseases may be
fatal;
Skin irritation and rash.
Cancer according to NTP* and IARC* */
National Toxicology Program, International
Agency for Research on Cancer.
Take precautionary steps:
Avoid inhalation of and skin contact with
dust, mist and fumes.
Wear and ensure that all bystanders wear
appropriate respiratory protection such as
dust masks designed to filter out
microscopic particles. (See OSHA 29 CFR
Part 1926.1153)
2
Contents
Transportation and storage...........................................13
Technical data.............................................................. 14
Accessories.................................................................. 16
Service..........................................................................16

Introduction

It is the owner's/employer's responsibility that the
operator has sufficient knowledge about how to use the
product safely. Supervisors and operators must have
read and understood the Operator's Manual. They must
be aware of:
• The product's safety instructions.
• The product's range of applications and limitations.
• How the product is to be used and maintained.

Product description

This drill motor is an electric core drill that is used with
an approved drill stand. The power source is a power
pack.
The diamond drill bit is a hollow drill that has diamond
segments. Water goes through the ball valve, the hose
and the diamond drill bit. The water flushes the drilled
material out off the slot and decreases the temperature
in the drill bit.

Intended use

The product is used to drill hard masonry, steel and
other hard materials. The product is used installed on an
approved drill stand. All other use is incorrect.
The product is used in industrial operations by operators
with experience.
To minimize dust emissions, use water to
bind the dust, when feasible.
1320 - 001 - 14.10.2019