Safety; Units Of Measurement; Intended Use; Safety Information - Stiebel Eltron SBS 601 W Manuel D'utilisation Et Installation

OperatiOn

Safety

Symbol
Damage to the appliance and environment
!
Appliance disposal
f This symbol indicates that you have to do something. The ac- f
tion you need to take is described step by step.
1.3

units of measurement

Note
All measurements are given in mm unless stated other-
wise.
2. safety
2.1

intended use

This appliance is designed for the storage of heating water and for
DHW heating. A glycol/water mixture of up to 60 % is permitted
if only dezincification-resistant metals, glycol-resistant gaskets
and diaphragm expansion vessels suitable for glycol are used
throughout the installation.
Any other or additional use is inappropriate, in particular usage
with alternative storage media. Observation of these instructions
and of instructions for any accessories used is also part of the
correct use of this appliance..
2.2

safety information

DANGER Scalding
There is a risk of scalding at outlet temperatures in
excess of 43 °C.
WARNING Injury
!
The appliance may be used by children aged 8 and up
and persons with reduced physical, sensory or mental
capabilities or a lack of experience and know-how
provided that they are supervised or they have been
instructed on how to use the appliance safely and have
understood the resulting risks. Children must never
play with the appliance. Children must never clean the
appliance or perform user maintenance unless they are
supervised.
Damage to the appliance and environment
!
The appliance is under pressure.
During the heating process, expansion water will drip
from the safety valve. If water continues to drip when
heating is completed, please inform your heating
contractor.
2.3

test symbols

See type plate on the appliance.
WWW.StieBeL-eLtrOn.COM
3.

appliance description

DThe appliance combines DHW heating and a buffer cylinder for
the hydraulic separation of heating system and heat pump. The
DHW is heated via a corrugated stainless steel internal indirect
coil that functions like an instantaneous water heater. The volume
of the cylinder is an energy store for DHW heating.
The appliance is ideally suited to operation with a heat pump.
In addition, a threaded immersion heater and an auxiliary heat
source can be connected.
sBs w sol
These appliance types are also equipped with an internal indirect
coil for solar DHW heating and central heating backup.
4.

cleaning, care and maintenance

f Have the function of the safety assembly and electrical safety f
of the fitted special accessories regularly checked by a hea-
ting contractor/electrician.
f Never use abrasive or corrosive cleaning agents. A damp f
cloth is sufficient for cleaning the appliance.
4.1

scaling

f Almost every type of water deposits limescale at high tempe- f
ratures. This settles inside the appliance and affects both the
performance and service life. If a flanged immersion heater
is installed, the heating elements must be descaled from
time to time. A heating contractor who knows the local water
quality will tell you when the next service is due.
f Check the taps regularly. You can remove limescale deposits f
at the tap outlets using commercially available descaling
agents.
ff Regularly activate the safety valve to prevent it from
becoming blocked e.g. by limescale deposits.
5.

what to do if ...

5.1

... the appliance develops faults

fault Cause
The outlet flow rate The perlator in the tap or
is low. shower head is scaled up
or contaminated.
If you cannot remedy the fault, notify your heating contractor. To
facilitate and speed up your enquiry, please provide the serial
number from the type plate (no. 000000-0000-000000):
f remedy
Clean and/or descale
the perlator or the sho-
wer head.
Nr. 000000-0000-000000
SBS 601-1501 W SOL | 15