Functional Description - Haussmann ALM140 Guide De L'utilisateur

FUNCTIONAL DESCRIPTION

ASSEMBLY
NOTE:
• Carefully remove the parts from the box.
• Inspect the parts carefully in order to verify that no breakage or damage occurred
during shipping.
• Do not discard the packing material until all parts have been examined.
Assembling the Handle (Fig. 3)
1. Remove any packing material which may be between the upper and lower
handles for shipping purposes.
Figure 3
2. Pull up and back on the upper handle to raise the handle into the operating
position. Make sure the lower handle is seated securely into the handle mounting
bracket.
3. Align the holes (C) between the upper handle (4) and lower handles (5). Insert the
bolts (B) and tighten them with the wing nuts (C) provided. (Fig. 2)
4. Secure the lower handle to the bracket with the handle knob on each side. (Fig. 2)
Installing the Grass Catcher Bag (Fig. 4)
1. THE MOWER MUST ALWAYS BE IN OFF POSITION AND UNPLUGGED
BEFORE STARTING THIS STEP.
2. Lift the chute cover. (1)
3. While holding up the cover (1), place the grass catcher bag hanger hooks (2) into
the opening on the chute cover (1) to allow the hanger hooks to attach to the rod
(3) which secures the chute cover.
NOTE: For optimal performance empty grass bag often during use. A full grass bag
will inhibit performance of the mower and collection of grass clippings.
Figure 4
Figure 2 names the major components of the
HAUSSMANN electric lawn mower:
1. Switch
2. Hand Grip
3. Power Button
4. Upper Handle
5. Lower Handle
6. Handle Knob
7. Motor Housing
8. Wheels
9. Discharge Chute
10. Discharge Cover
11. Height Adjustment Lever
12. Chute Cover
13. Grass Catcher Hook
14. Grass Catcher Bag
15. Mulch Plug
16. Cable Clip
Figure 2
21