SCS Sentinel WAPP Manuel D'utilisateur page 62

Low wireless
signal
Poor image quality
Motion detection is
not working or
over-react
The APP cannot
record any video
clips
Email alert is not
working
 Wireless devices such as wireless home stereo
system may reduce the signal strength. Leave
as much space as possible between the
camera/mobile device and these wireless
devices.
 Clean the camera lens using lens cleaning
cloth. Spots or dust on the lens can also cause
image quality problems.

Make sure the sensitivity setting is turned ON
(please refer to the Sensitivity Setting section).
 Adjust the sensitivity of the motion sensor
(please refer to the Sensitivity Setting section).

In motion detection mode, a moving object
within the camera viewing angle is necessary
to trigger the motion sensor for recording
 Make sure the system date and time have been
correctly setup.
 Make sure the SD card has been correctly
inserted
 Make sure the motion detection function has
been enabled. (please refer to the Sensitivity
Setting section).
 Please format the SD card when it is used for
the first time (please refer to the SD Card
Format section)
 Make sure the email alert function is enabled
(please refer to the
 Gmail account is suggested for the email alert
function. Make sure you have setup the
system configuration as suggested in the
section.
Alert
 Make sure the email address is has been
correctly entered.
28
section).
Email Alert
Email