Operating Your Appliance; Using The Control Panel - Zephyr PRB24C01AS-OD Guide D'utilisation, D'entretien Et D'installation

ZEPHYRONLINE.COM
If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the appliance may not start and will not keep the
last set temperature.

Using the Control Panel

Power Button
Press and hold this button for three seconds to power your unit on or off. While the unit is on,
the R "Compressor Running" light may illuminate to indicate the internal compressor is active.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 50ºF is the highest
available temperature on this unit.
Decrease Temperature
Press this button to decrease the temperature by one (1) degree increments. 34ºF is the lowest
available temperature on this unit.
ºF/ºC Selector
F
C
Press this button to switch the display temperature between Fahrenheit and Celsius.
NOTE: The outdoor beverage cooler is equipped with a temperature memory function. If power is
suddenly lost, the previous set temperature will be saved, and the cooler will return to this
setting once power is restored.
PRB24C01AS-OD Use, Care, and Installation Guide
R
F
C
This outdoor beverage cooler has a temperature range from 34ºF-50ºF.

Operating Your Appliance

F
C
23