Care And Maintenance; Normal Sounds; Cleaning The Unit - Zephyr PRB24C01AS-OD Guide D'utilisation, D'entretien Et D'installation

Care and Maintenance

Normal Sounds

Your new beverage cooler may make sounds that are not familiar to you. Most of the new sounds are
normal. Hard surfaces like the floor or walls can make the sounds seem louder than they actually are.
The following describes the kinds of sounds that might be new to you and what may be making them.
Rattling noises may come from the flow of the refrigerant or the water line.
Items stored on top of the beverage cooler can also make noises.
The high efficiency compressor may make a pulsating or high-pitched sound.
Water running from the evaporator to the water bin may make a splashing sound.
As each cycle ends, you may hear a gurgling sound due to the refrigerant flowing in your
beverage cooler.
You may hear air being forced over the condenser by the condenser fan.

Cleaning the Unit

Periodic cleaning and proper maintenance will ensure efficiency, top performance, and long life.
Interior Cleaning
1. Disconnect power to the unit.
2. Open the door and remove the contents and shelves.
3. With a clean cloth, wipe down the interior of the unit.
4. Reinsert the shelves and beverages.
5. Reconnect power to the unit.
Exterior Cleaning
The outside of the unit is stainless steel. The unit may be cleaned with a stainless steel cleaner. Apply
a nonabrasive cleaner, such as a soft scrub or sponge, dampen it, and rub the area in the same
direction as the stainless steel grain. Use a stainless steel cleaner and follow the manufacturer's
instructions. Never use an abrasive or caustic cleaning agent as it could damage the exterior or cause
discoloration.
26 PRB24C01AS-OD Use, Care, and Installation Guide
P R E S R V ™
B E V E R A G E
C O O L E R
O U T D O O R