Operating Your Appliance; Using The Control Panel - Zephyr BRISAS BBV24C01AG Guide D'utilisation, D'entretien Et D'installation

Operating Your Appliance

If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the appliance may not start and will not keep the
last set temperature.

Using the Control Panel

Power Button
Press and hold this button for three seconds to power your unit on or off. While the unit is on,
the R "Compressor Running" light may illuminate to indicate the internal compressor is active.
Increase Temperature
Press this button to increase the temperature by one (1) degree increments. 65ºF is the highest
available temperature on this unit.
Decrease Temperature
Press this button to decrease the temperature by one (1) degree increments. 38ºF is the lowest
available temperature on this unit.
Interior Light
Press this button to turn the lights on and off. The light color is Deep Blue.
ºF/ºC Selector
Hold the Increase and Decrease Temperature buttons at the same time to switch the display
temperature.
NOTE: The beverage cooler is equipped with a temperature memory function. If power is suddenly
lost, the previous set temperature will be saved, and the cooler will return to this setting once
power is restored.
20
This beverage cooler has a temperature range from 38ºF-65ºF.
BBV24C01AG Use, Care, and Installation Guide
B R I S A S
B E V E R A G E
C O O L E R
S I N G L E ZO N E