BioLite BaseCamp Guide De L'utilisateur page 15

• Approximately 10 minutes into a strong fire, the LED indicators will illuminate. You
may now begin charging your USB devices at any time provided a minimum of
two battery level indicators are lit (fig. 2).
• With a strong fire, the BioLite BaseCamp can provide 5W of electricity through
its USB port. This is enough to charge tablets, cameras, phones, etc. CAUTION:
Charging devices when the LED indicators are not illuminated may result in
damage to your device or the powerpack. DO NOT use splitters to try and charge
two devices simultaneously.
• The powerpack is capable of storing power for later usage. To charge when the
stove is not in use, press the power button to activate the USB port (fig 3). The
battery level indicators will show the battery charge status.
• When charging while cooking, keep electronics away from the stove. Do not rest
or prop devices on the stove.
• The BioLite BaseCamp comes with an included USB gooseneck light that allows
you to light up your cooksite. For light during start-up, press the power button on
the powerpack to activate the USB port. Plug in gooseneck. Turn on by tapping
your finger on the light's BioLite logo. To dim the USB gooseneck, press gently
on the plastic side of the light. To turn USB gooseneck off, tap your finger on the
BioLite logo again. The gooseneck features a USB pass-thru that allows you to
plug another device. Please note that devices can be charged while the light is in
use, but not all devices will be compatible with this mode.
2
3
WARNING
The Stove will be extremely hot when in use. Keep
electronics from touching the stove as contact may cause
damage to your electronics. When plugging in electronics to
the powerpack, do not touch any metal surfaces as they will
be hot. Only touch the plastic parts of the powerpack.
English | 15