Special Precautions; Routine Maintenance - Gemm BRERA Série Mode D'emploi

Masquer les pouces Voir aussi pour BRERA Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

8 – MAINTENANCE
8.1 – SPECIAL PRECAUTIONS
Contact the manufacturer for any anomalies not described in this manual; contact the manufacturer
also for any doubts during the maintenance operations described herein.
by unauthorized personnel may damage the appliance and expose the operator to serious hazards.
Maintenance carried out by unauthorized personnel is considered tampering with the appliance and
therefore nulls the warranty and relieves the manufacturer of any responsibility.
Any routine or extraordinary maintenance operation that requires the electric box to be
opened or the machine to be dismantled, even partially, must be carried out only after the
appliance has been switched off,
Any maintenance operations carried out on a live machine may cause people serious
accidents which may also be fatal.
The safety devices must be deactivated only by authorized personnel, who will guarantee safety for
people and avoid damage to the machine. The safety devices must be carefully activated again after
carrying out maintenance.
During maintenance or repairs unauthorized persons must keep a safe distance from the appliance.
Observe the intervals prescribed or indicated in this manual for making inspections.
At the end of maintenance or repairs the appliance can be started only after the specialist engineer
has made sure that:
-
-
-
-
8.2 – ROUTINE MAINTENANCE
8.2.1 – ROUTINE MAINTENANCE TABLE (TAB. 5)
Component
Type of operation
Chamber
Cleaning
External part
Cleaning
Condenser
Cleaning
Core probe
Cleaning
8.2.2 – CLEANING THE CHAMBER
Carry out this operation whenever necessary.
APPLIANCE STATUS:
-
ON/OFF button on OFF (
-
power supply plug disconnected from the mains.
AUTHORIZED PERSONNEL
Appliance operator.
WL5/1-2 Rev.00 05-2013
all the work has been fully carried out;
the safety systems are active;
the appliance is working perfectly;
no-one is working on the appliance.
Timing
When needed
When needed
Every 30 days
Every cycle
on the display);
on the display, and unplugged.
Responsibility
Appliance operator
Appliance operator
Appliance operator
Appliance operator
Maintenance carried out
Method
See para. 8.2.2
See para. 8.2.3
See para. 8.2.4
See para. 8.2.5
Tab. 5
pag. 55

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Brera wl5 / 122Brera wl5 / 126Brera wl5 / 222Brera wl5 / 226

Table des Matières