Krüger & Matz Odyssey 3.1 Manuel D'utilisation page 26

Pairing
1. Turn on the soundbar and external device.
2. Press the Bluetooth button on the soundbar. "NO BT" message will
appear on the display.
3. Turn on the Bluetooth function on external device. Search for
available devices. Select "KM0556".
4. Begin pairing. If password is required, input 0000.
5. After successful pairing there will be an audio cue, and the display
will show "BT" message.
6. You can now play the music via Bluetooth. If external device
supports AVRCP function, it is possible to control the music with the
remote control.
PLAYING FROM USB DRIVE
1. Connect the USB drive to USB socket.
2. Press the source button to select the USB mode.
3. Use the skip/pause buttons to control the music.
Note:
• The soundbar supports USB drives with capacity up to 32 GB.
• The soundbar plays MP3 files only.
EN
26
Owner's manual