Krüger & Matz Odyssey 3.1 Manuel D'utilisation page 24

Connecting with AUX socket
Plug the 3,5 mm jack-jack cable to
soundbar and to external device.
You may also use jack-RCA cable
(sold separately).
PAIRING SOUNDBAR WITH SUBWOOFER
Automatic pairing
The subwoofer and soundbar will automatically pair when both
devices are plugged into the mains socket and turned on. While
pairing, the pairing indicator will flash. After successful pairing, the
pairing indicator will light up. If pairing failed, do manual pairing.
Manual pairing
1. Make sure that both soundbar and subwoofer are connected
correctly to mains, and the soundbar is in standby mode.
2. Press and hold the pairing button. Subwoofer will go to pairing
mode. Pairing indicator will flash.
3. Press the power button on the soundbar.
4. After successful pairing, the pairing indicator will light up.
5. If connection failed, disconnect both devices form mains and wait
4 minutes. Repeat steps 1-4.
EN
Note:
• Make sure, that there is no devices emitting noise around.
• The soundbar has to be places within 6 meters from the subwoofer.
24
Owner's manual
A
B