Audio-Technica ATH-CKS55XBT Manuel D'utilisateur page 12

English
About the earpieces
Sizes and position
It may be dif cult to hear the bass sounds if the earpieces do not t snugly in your ears. These
headphones come with silicon earpieces in four sizes (XS, S, M and L). At the time of purchase, the
M size silicon earpieces are included and positioned in standard position. To ensure the best sound
quality, it may be necessary to change the size and/or position to that which is best suited for you,
and adjust the earpieces inside your ears for a snug t.
●
2 POSITION POST
Cleaning the earpieces
Remove earpieces from the headphones and clean them with diluted detergent. After cleaning, dry
before use.
Replacing the earpieces
Remove each old earpiece, and mount the new earpiece over the
stem up to the base of the stem. There are 2 positions as shown in
the gures above.
Note:
・ Periodically remove and clean the earpieces as they become dirty easily.
Using with dirty earpieces may cause the headphones themselves to
become dirty, resulting in deteriorated sound quality.
・ Earpieces are consumable parts which degrade through storage and use. If the t has become loose or if
the earpieces appear to have degraded, purchase replacements.
・ When reattaching earpieces to the headphones, be sure to check that they are securely attached. Injury or
illness may occur if the earpieces are left inside the ear.
12
1. Standard position
The earpieces are
positioned nearer to
the drivers
2. Extended position
The earpieces are
positioned further
from the drivers than
the Standard position
Earpiece cross-section
view
No gap
Gap