Deleting The Binding Of A Measuring Switching Socket; Selecting The Radio Measuring Switching Socket; Switching The Radio Measuring Switching Socket On Or Off; Reset Of The Consumption Display For A Radio Measuring Switching Socket - Renkforce RS2W Mode D'emploi

c) Deleting the binding of a measuring switching socket
Push the button "FUNC" when the radio measuring display/thermostat is ready until you can see
"Meter" in the upper left of the display. Now push the button "+/ON" for more than three seconds.
The symbol for the switching socket starts to flash.
If no further inputs are made below, the device will switch back to the standard display
after approx. 20 seconds.
Use the button "+/ON" to switch off the switching socket (1, 2 or 3 - for
example, see figure 7, switching socket 1) that you want to delete. Then
push the button "+/ON" for more than three seconds. Deletion is suc-
cessfully completed when the icon of the bound switching socket (see
figure 6) is no longer displayed.
d) Selecting the radio measuring switching socket
Push the button "FUNC" when the radio measuring display/thermostat is ready until you can see
"Meter" in the upper left of the display. Use the button "+/ON" to select the switching socket (1, 2
or 3 - see figure 7) that you want to use.
e) Switching the radio measuring switching socket On or Off
Push the button "FUNC" when the radio measuring display/thermostat is ready until you can see
"Meter" in the upper left of the display. Use the button "+/ON" to select the switching socket (1, 2
or 3 - see figure 7) that you want to use.
Then push the button "FUNC", until the display shows "Manu". The button "+/ON" switches
the selected switching socket on manually. The button "-/OFF" switches the selected switching
socket off manually.
f) Reset of the consumption display for a radio measuring switch-
ing socket
Push the button "FUNC" when the radio measuring display/thermostat is ready until you can see
"Meter" in the upper left of the display. Use the button "+/ON" to select the switching socket (1, 2
or 3 - see figure 7) for which you want to reset the consumption display.
Then push the button "-/OFF" for more than three seconds. The reset for the consumption dis-
play is successfully completed when the display shows 0.000 kW/h in the consumption display.
28
Figure 7