Using The Stopwatch Function - ADE TD 1600 Mode D'emploi

‚ Via MODE you can display the time
‚ Via START/STOP you can interrupt
‚ To reset the indicator to zero,

Using the stopwatch function

1. Press MODE repeatedly until "00
shown on the display.
2. Press MIN and SEC simultaneously in order to
set the indicator to zero.
3. Press START/STOP to start, to stop, and to
continue.
Via MODE you can display the time
again. The time measurement
continues to run in the background.
34
again. The countdown continues
to run in the background.
the countdown at any time and
then start it running again.
press the MIN and SEC keys
simultaneously. To do this, the
countdown must be stopped.
00 " is
M S
TD 1600 / 1601