Replacing The Fuse - Absaar HV04 Instructions D'utilisation

INDICATORS FOR AUTOMATIC CHARGERS
The green LED lights as soon as the battery is fully charged.
An ongoing charging process is indicated by the yellow LED lighting.
The green LED lights when the battery charger is connected to the mains.

REPLACING THE FUSE

Unplug the power cord from the mains and disconnect the battery clamps from the battery before
replacing the blade-type fuse.
The fuse is visible on the front panel.
Remove the defective fuse (fuse wire broken) and replace it with a fuse with the same amperage.
To remove the fuse, insert a screwdriver into the slot between the fuse and the fuse holder. Use the
screwdriver as a lever.
DO NOT APPLY BRUTE FORCE WHEN REPLACING THE FUSE!
A defective fuse is excluded from the warranty.
A spare fuse is supplied with the device. You can also use standard automotive fuses as replace-
ment fuses.
MADE IN GERMANY
www.absaar.com
EN
13