Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
Switch the shaver to the „OFF" position before charging. Connect the
cable to the shaver and a live USB interface (e.g. PC) or a USB adapter. The
indicator light is red when connected to the power source and changes to
green when the shaver is fully charged.
Application
1.
Remove the protective cover.
2.
To use the eyebrow shaver, slide the switch towards the eyebrow shaver.
To use the face shaver, slide the switch in the other direction.
3.
Pull the skin a little taut. Place the desired shaving head straight on the
skin. Move it slowly back and forth over the dry skin.
4.
Slide the switch to the centre to switch off the appliance.
Loosening the shaving heads
Hold the handpiece in one hand and twist the shaving head off the attachment.
ATTENTION: The face shaver must be turned clockwise, the eyebrow shaver
counterclockwise. Please pay attention to the direction of rotation so as not
to damage the shaving head. To put it on, turn the shaving head firmly on the
attachment.
9
Publicité
Table des Matières
