Setting Up The Acoustimass Module; Attaching The Rubber Feet To The Acoustimass Module - Bose CineMate 130 Notice D'utilisation

Setting Up the Acoustimass
Attaching the rubber feet to the
Acoustimass module
Attach the rubber feet to the Acoustimass module to protect your floor.
1.
Turn the Acoustimass module upside down onto a soft surface to protect it
from being damaged.
2. Attach the rubber feet to the bottom of the Acoustimass module.
3.
Place the Acoustimass module on its feet.
Caution: Do not place the Acoustimass module on its front, back end, side or
top when in use.
4.
Remove all protective films. These may affect acoustic performance if left
in place.
10 - English
®
Rubber foot
Bottom of Acoustimass module
Module