Em24 W1 Use; Introduction; Display - CARLO GAVAZZI EM24 W1 Manuel D'emploi

EM24 W1 use

Interface

Introduction

EM24 is organized in two menus:
• measurement and information menu: pages used to display the measurement pages, information relevant to the programmed parameters
and instrument firmware release
• settings menu: pages used to set parameters

Display

The display is divided into 3 lines.
6 EM24 W1 - Instruction manual | CARLO GAVAZZI Controls SpA
Symbol
Displaying of phase-to-neutral system voltage
Displaying of phase-to-phase system voltage
Displaying of max values
Displaying of system variables
Displaying of dmd variables
Overflow.
Note: in case of overflow of at least one current, hour
counter increase is disabled. The calculation of DMD
and the energy counters are calculated considering the
EEEE
value of the measure in overflow as equal to the maxi-
mum managed by the instrument. "EEEE" in a single
phase variable automatically implies that the upper limit
of the related system variable has been exceeded, and
the indication of PF is forced to "1,000".
Description