Special Hazards; Labelling/Safety Marks - WIKA Unitrans A-IUR-1 Mode D'emploi

2. Safety

2.4 Special hazards

WARNING!
Observe the information given in the applicable type examina-
tion certificate and the relevant country-specific regulations for
installation and use in hazardous areas (e.g. IEC 60079-14,
GB
NEC, CEC). Non-observance can result in serious injury and/or
damage to equipment.
For additional important safety instructions for instruments with
ATEX approval see chapter 2.3 "Additional safety instructions for
instruments per ATEX".

2.5 Labelling/Safety marks

Product label
Model
S# Serial no.
P# Product no.
Explanation of symbols
CE, Communauté Européenne
Instruments bearing this mark comply with the relevant European
directives.
ATEX European Explosion Protection Directive
(Atmosphère = AT, explosible = EX)
Instruments bearing this mark comply with the requirements of
the European directive 94/9/EC (ATEX) on explosion protection.
8
Before mounting and commissioning the instrument, ensure
you read the operating instructions!
WIKA operating instructions unitrans indicator module model A-IUR-1

Date of
manufacture