Hardware Included - Craftsman CMST98240BK Guide D'utilisation

English
Hardware Floor Cabinet
Tools Required
• Drill
• 1/4" Drill Bit
• 1/8" Drill Bit
• 7/16" Socket
• Socket Wrench
• 5/32 Hex Key

Hardware Included

1/4‑20 x 3/4" Button Head Screw
(Qty: 11)
1/4‑20 Serrated Flange Nut (Qty: 3)
Screw Leveler (Qty: 4)
Snap Grommet (Qty: 2)
Shelf Bracket (Qty: 1)
Mounting Bracket (Qty: 1)
14‑10 x 3" Hex Screw Qty: 1)
Hardware Wall Cabinet
Tools Required
• 3/8" Socket
• 7/16" Socket
• Socket Wrench
• 3" Socket Extension
• Drill
• 1/8" Drill Bit
Hardware Included
Snap Grommet (Qty: 2)
14‑10 x 3" Hex Screw Qty: 1)
1/4‑20 Serrated Flange Nut (Qty: 3)
Mounting Bracket (Qty: 1)
1/4‑20 x 3/4" Button Head Screw
(Qty: 11)
6
Hardware Base Cabinet
Hardware Included
8 7 6 5 4 3
F
E
D
C
Hardware Wood Top Work Surface
B
UNLESS OTHERWISE SPECIFIED: FINISH:
DIMENSIONS ARE IN MILLIMETERS
SURFACE FINISH:
TOLERANCES:
LINEAR:
ANGULAR:
NAME SIGNATURE DATE
DRAWN D. CHITALE DSC 27-FEB-2019
Tools Required
CHK'D
APPV'D
MFG
A
MATERIAL:
DRAWING IS DERIVED FROM SOLIDWORKS CAD MODEL AND IS PRODUCED IN ACCORDANCE WITH ASME Y14.100 AND RELATED DOCUMENTATION PRACTICES Q.A
0.75 INCH KILN DRIED PINE
THIS DRAWING AND THE INFORMATION IT CONTAINS IS THE PROPRIETARY PROPERTY OF STANLEY BLACK & DECKER INC. AND MAY NOT BE REPRODUCED .033 PER DWGS 6984/11464
OR EQUIVANLENT
WITHOUT WRITTEN PERMISSION FROM STANLEY BLACK & DECKER PACKAGING ENGINEERING
WEIGHT:
8 7 6 5 4 3
• Socket Wrench
• 3/8" Socket
• 3/8" Wrench
Hardware Included
ASSEMBLY
nOTE: Not all assembly instructions will relate to your model.
Floor Cabinet
Lock Bracket Mounting (Fig. B)
items needed
• 1/4‑20 x 3/4" Button Head Screw (Qty: 2)
• 1/4‑20 Serrated Flange Nut (Qty: 2)
• Shelf Bracket (Qty: 1)
• 5/32 Hex Key
• 7/16" Socket
• Socket Wrench
Process
1. Install the leveling feet. Please refer to Assembling the
Leveling Feet under the Assembly section.
2. Mount bracket
head screws
3. Adjust shelf bracket for lock cam to latch.
Mounting Bracket Assembly (Fig. C, D)
items needed
• 1/4‑20 x 3/4" Button Head Screw (Qty: 1)
• 1/4‑20 Serrated Flange Nut (Qty: 1)
• Mounting Bracket (Qty: 1)
• 5/32 Hex Key
• 7/16" Socket
• Socket Wrench
• 14‑10 x 3" Hex Screw Qty: 1)
Process
nOTE: Mounting bracket
of the cabinet. Mounting shown on left side.
1. Place mounting bracket in desired mounting location.
Screw Leveler (Qty: 4)
2 1
F
E
Filler Bracket (Qty: 1)
D
C
B
DEBURR AND
DO NOT SCALE DRAWING REVISION: 1
BREAK SHARP
EDGES
TITLE:
PALLET-TWO WAY-WOOD-EDGE TOP CHEST 41 INCH
A
DWG NO.
A3
XXXXXXXXXX
SCALE:1:8 SHEET 1 OF 1
2 1
#14‑10 x 5/8" Hex Screw (Qty: 4)
#14‑10 x 1" Hex Screw (Qty: 2)
2 to unit using (2) 1/4‑20 x 3/4" button
3 and (2) 1/4‑20 serrated flange nuts
5 may be mounted on either side
4 .