General Features - Multitech Systems MultiModem MT5600ZDX Guide De Démarrage Rapide

MT5600ZDX/ZDXV Quick Start Guide

General features

Compliance with major ITU-T, TIA, and EIA international standards to ensure
compatibility with other modems.
Distinguishes data, fax, or voice calls using DTMF and tone detection with software
packages supporting these features.
Data
Supports the V.90 and 56K standards for data transmission at speeds up to
56Kbps, while maintaining compatibility with lower-speed modems.
Note: the V.90 and 56K standards transfer data asymmetrically - client
downloads at speeds up to 56K bps, client uploads at speeds up to 33.6K bps.
Supports the enhanced ITU-T V.34 standard, with data transmission speeds to
33.6K bps, while also maintaining compatibility with lower-speed modems.
Supports V.90 and 56K speeds plus 33.6K, 31.2K, 28.8K, 26.4K, 24K, 21.6K,
19.2K, 16.8K, 14.4K, 12K, 9.6K, 7.2K, 4.8K, 2.4K, 1.2K, and 0-300 bps.
Automatic fallback to slower speeds in noisy line conditions, and fall-forward to
faster speeds as conditions improve.
ITU V.42 LAP-M and MNP Class 3 and 4 error correction.
ITU V.42bis (4-to-1) and MNP 5 (2-to-1) data compression.
Automatic disabling of compression when transferring already-compressed
files.
Autodial, redial, pulse (rotary) and touch-tone dial.
Dial tone and busy signal detection for reliable call-progress detection.
Compatibility with the standard AT command set used by most communication
programs.
MNP10 and MNP10EC
H.324 compliant (videophone ready).
Distinctive ring support to route voice, data, or fax calls on a single phone line.
Plug and Play ( PnP ) serial support.
FlashROM upgradable.
Fax
Supports V.17, Class 1/Group 3 and Class 2 fax communication standards,
allowing it to communicate with other fax modems as well as with fax machines.
Sends and receives faxes from your computer at 14,400 bps, 9600 bps, 7200
bps, 4800 bps, 2400 bps, or 300 bps.
8
TM
Enhanced Cellular Performance (error correction).