Salli Professional Mode D'emploi page 13

WIDTH ADJUSTMENT
1. Stand behind the chair. Release the seat
width adjustment mechanism by hitting the
lever briskly with your palm (Picture 1).
2. Move the seat parts into the desired position
by sliding them together or apart (Picture 2).
3. Lock the mechanism by snapping the lever
from right to left. You may need to repeat the
procedure few times at the beginning, to find
the optimal adjustment for you.
SEAT WIDTH ADJUSTMENT PRINCIPLES
Optimal seat width adjustment varies with the user's individual physiology. We recommend keeping the middle
gap as wide as comfortably possible. The wider the gap, the less pressure to the sensitive ducts under the pelvic
floor.
CARE AND CLEANING OF SALLI
LEATHER SEAT
The leather will stay clean longer if you wipe it every now and
then with a moist cloth.
Remove stains immediately. Wipe lightly with a cloth or paper
towel moistened with a mild soap and water solution.
You can also clean the seat with products made for leather furni-
ture or riding equipment.
Note that bleeding textiles may colour light-coloured leather.
Marks on the leather and slight colour variations are natural to
genuine leather and do not affect the durability of the product.
POLYURETHANE
Can be cleaned by wiping with disinfectant.
ARTIFICIAL LEATHER
Wipe the stains with mild soap and water. Let dry or blow dry. If
you use a solution containing alcohol, test it first under the seat.
ESD-FABRIC
Fabric is made of wool and should be chemically cleaned if total
cleaning is necessary.
GAS CYLINDER CARE AND
LUBRICATION
If the gas cylinder becomes slow or stiff, spray a light
coating of lubricant onto the thinner end of the gas
cylinder.
INCLINATION ADJUSTMENT
(Check the models from previous picture)
1) Hold onto the chair with your hand and release the inclination mechanism by
lifting up on the lever (Picture).
In the best inclination position you do not feel like sliding forward or backward,
and sitting causes no pressure.
2) When the angle feels right, release the lever to lock the mechanism.
We recommend that you try the inclination and width
adjustments several times in different combinations to find
CASTOR
REPLACEMENT
1.
2.
3.
If a castor stem remains caught in the base, grip
Please notify that you should select the castors
WEIGHT TOLERANCE
The recommended maximum weight for a Salli user is
120 kg (264 lbs), Salli Strong 150 kg (330 lbs).
Picture 1
the optimal adjustments for you.
Turn the chair side-
ways.
If you have strong
hands, you can remove
the castors by pulling.
Otherwise you may
need a lever, for
example, a chisel or a
screwdriver which you
place between the cas-
tor and the base.
Push the new castors
into place.
the stem with pliers and pull.
You may need to tap the pliers with a hammer
until the stem comes loose.
If your castors get stiff, replace them all.
fitting best to the used surface of the floor.
Picture 2
EN
13