Dismounting, Return And Disposal - WIKA TIF11 Mode D'emploi

7. Dismounting, return and disposal

7. Dismounting, return and disposal
EN
7.1 Dismounting
Connections must only be opened once the instrument has been
depressurised and has cooled down.
7.2 Return
Strictly observe the following when shipping the instrument:
All instruments delivered to WIKA must be free from any kind of
hazardous substances (acids, bases, solutions, etc.) and must therefore
be cleaned before being returned.
When returning the instrument, use the original packaging or a suitable
transport packaging.
To avoid damage:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with the shock-absorbent material, in the
packaging.
Place shock-absorbent material evenly on all sides of the transport
packaging.
3. If possible, place a bag containing a desiccant inside the packaging.
4. Label the shipment as carriage of a highly sensitive measuring
instrument.
14
WARNING!
Physical injuries and damage to property and the
environment through residual media
Residual media in the dismounted instrument can result in a
risk to persons, the environment and equipment.
▶
Wash or clean the dismounted instrument, in order to
protect persons and the environment from exposure to
residual media.
Information on returns can be found under the heading
"Service" on our local website.
WIKA operating instructions model TIF11