DSPro 09123 Mode D'emploi page 17

■
■
■
■
■
■
■
■
■
09123_DE-EN-FR-NL_A6_V1.indb 17 09123_DE-EN-FR-NL_A6_V1.indb 17
The mains voltage must match the rating plate of the device
and the USB mains adapter.
Do not use the USB mains adapter or the USB cable with
another device and never use the device with another USB
mains adapter or USB cable.
Make sure that the USB cable is not squashed, bent or laid
over sharp edges and does not come into contact with hot
surfaces.
When the USB mains adapter is removed from the plug
socket, always pull on the mains adapter and never the
USB cable. Never wind the USB cable around the base sta-
tion or the USB mains adapter.
Never place heavy objects on the USB cable.
Protect the device from: impacts, fi re, heat, direct sunlight,
sub-zero temperatures. The base station, USB cable and
USB mains adapter must also be protected from wet condi-
tions and persistent moisture.
Use only original spare parts from the manufacturer in order
to guarantee that there is no interference that may prevent
the device from working and to avoid damage.
In the event of damage / faults, switch the device off imme-
diately. Do not use the device if it is damaged.
Do not make any modifi cations to the device. Do not try to
repair it yourself or to replace any individual parts. In the
event of any damage, please contact our customer service
department.
The individual LEDs cannot be replaced.
17 EN
08.11.2018 12:32:02 08.11.2018 12:32:02