Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
EN
Translation of the original operating instructions
AKKU JUNIO-STRIPPER 18V
Dear Customer
You have chosen to purchase the AKKU JUNIO STRIP-
PER 18V the right choice when it comes to quality and
performance.
This operating manual contains important instructions
for operating the machine.
Attention!
Please read this operating manual carefully, and
ensure that all users read this manual before
operating the machine.
Observing the safety instructions protects against
situations that may endanger health and safety
and helps to prevent improper use of the machine.
Ensure that you are confi dent operating the machine
before commencing work. During operation is too late!
Do not allow persons to operate the machine if they do
not possess the necessary expertise to do so.
Legend
Important instructions relating to safety and damage
prevention are indicated in this operating manual by
the following symbols.
Important instructions
Warning
Warning of general danger
Wear safety glasses
Wear hearing protection
Read the instructions/notices
Special waste
Wolff GmbH & Co KG | D-74360 Ilsfeld | Ungerhalde 1 | Fon: +49 (0)7062-91556-0 | Fax: +49 (0)7062-91556-41 | www.wolff -tools.de
12
1.0 Product description
Important components of the machine
The numbering of the product features refers to the illust-
ration of the machine on the graphics page 2-3.
A
1 Motor
2 Striker Foot Casting
3 Handle
4 Knife
5 Switch
6 Akku
Functional description
Please refer to the graphics on pages 2-3 while you
read the operating instructions.
Restriction of use
The AKKU JUNIO-STRIPPER 18V is exclusively for remo-
ving bonded fl oor coverings in dry environments.
It should not be used for any other purpose. Wolff GmbH &
Co.KG cannot be held responsible for any damage or loss
caused by incorrect use.
Publicité
Table des Matières
