Explanation Of Symbols; Instructions For Use; Overview; Charging The Battery - EUFAB 13490 Manuel De L'opérateur

5. EXPLANATION OF SYMBOLS

Complies with EC directives
Protective insulation, Class 2

6. INSTRUCTIONS FOR USE

6.1 OVERVIEW

COB Battery powered workshop lamp:
1 LED torch function
2 COB light field
3 Switch
4 Fold-out bracket holder
5 Fixture hook
6 Fixture magnet (rear)
7 USB charging socket
8 Charging control lamp
9 Charging contacts
10 Fixture magnet on bracket holder
Charging station:
11 Charging contacts
12 USB charging socket
Charger:
15 USB connection

6.2 CHARGING THE BATTERY

You can connect the workshop lamp directly to charge the battery, Figure 2, or you may use the charging station, Figure 3. With both options, you can use either the
charger or the vehicle adapter.
Figure 2: Connecting directly
The indicator lamp will light red during the charging process. When the battery pack is charged, the control lamp will light up in green. To end the charging process,
first disconnect the charger/vehicle adapter at the socket, then disconnect the workshop lamp from the charging station/cable.

6.3 FUNCTIONS

Pressing the switch multiple times (Position 3 in the overview) enables you to activate the following functions of the cordless workshop lamp:
• COB light field on (Position 2 in the overview), dimmed function on
• COB light field,
• COB light field dimmed function off/LED torch function on (Position 1 in the overview)
• Off
6
Labelled electrical products may not be
disposed of in the household waste
Complies with the German product
safety act
Vehicle adapter:
13 USB connection
14 Control lamp
Charging cable:
16 USB type A - plug
17 Micro-USB B connector
Figure 1: Overview
Figure 3: Using the charging station
Only use in dry rooms
Read the operating instructions