Connect The Power Adapter; Install The Supplied Batteries; Charge The Stethoscope - Philips 8000 Série Mode D'emploi

2. Connect the power adapter

3. Adjust the volume
Adjust the volume of the audio device to get
the best sound quality (check the manual of
your audio device for information).

Install the supplied batteries

Your stethoscope comes with a high quality
rechargeable lithium-polymer battery to
maximize battery lifetime. Insert/remove the
Note
•
Over time the capacity of the battery will decrease.
You can order replacement batteries through
the Philips service centers or online stores at
www.shop.philips.com
EN
6
The spare battery
The spare battery extends the operating time

Charge the stethoscope

Note
•
the supplied battery for 5 hours for optimum battery
capacity and lifetime.
•
You can charge one stethoscope per each time.
•
Normally, a full charge takes 2.5 hours.
1
Power on the docking station.
2
Place the stethoscope on the docking
station.
»
spare battery is inside the charging slot,
the orange charging LED of the spare