Setup Menu - Ecler ALMA26 Notice D'utilisation

9. SETUP MENU

The ALMA26 offers a general setup menu (hereinafter SETUP menu), with parameters that
globally affect the unit, such as unit name, internal signal generator, functions assigned to the REMOTE
ports, etc.
To open the SETUP menu you have to simultaneously press and hold down the left and right
MENU keys.
The new edited values are activated in real time. You can cancel an edit operation, bringing back
the value before editing, by pressing SHIFT + CANCEL.
To exit the Edit menu and return to the main screen:

Press SHIFT + EXIT

Stay 2 minutes without operating any control on the front panel
The next page shows the full structure and options of the SETUP menu.
NOTES:
1. In the assignation page of the REMOTE 1 or REMOTE 2 ports to the volume control of inputs
or outputs, the signs displayed under the number of an input or output have the following
meanings:
Blank = Input or output not assigned to any remote port
● = Remote port assigned to the input or output
X = Input or output already assigned to the other remote port
2. In the internal signal generator page, the displayed abbreviations meaning is:

PINK N.

WHITE N.

SINEWAVE

POLARITY
: Pink noise
: White noise
: Sinusoidal signal, with adjustable frequency
: Polarity check signal, with adjustable frequency
17