System Mode - Hazet 4812-10-4 S Notice D'utilisation

Step 4: Raise up the rubber sheet, and insert SD memory card
correctly.
Step 5: Hold down the device switch until the screen displays.
Step 6: After the device turns ON, aim the probe front end at an
area to be snapped or recorded. Press down the snap or
record button to make the image into an image or video
file.

System Mode

This device offers 3 easy-to-operate modes: „Preview'', „Browse"
and „Menu".
- Preview: Once the device turns ON, „Preview" mode is activated.
Images received by the device are shown on the screen real-
time. Under the „Preview" mode, the user may retrieve pictures
or record.
32
Design and Function
3