Transfer Data; Cleaning; Maintenance - VOSS LUNIOX VC24 Notice D'utilisation

INSTRUCTION MANUAL LUNIOX VC24

11 TRANSFER DATA

The camera is supplied with a USB data cable.
1. Open the latches (2) and the camera.
2. Plug one side of the cable into the USB connector (10) on
the bottom of the camera and connect the other side of
the cable to your PC.
The storage medium will be displayed on your PC.
The data can now be transferred to your PC.

12 CLEANING

NOTICE
► Do not use aggressive solvents/cleaning agents,
brushes, sharp objects or similar for cleaning. These
can damage the surface.
► Do not immerse the camera in water or other liquids.
There is a risk of short circuit.
1. Before cleaning, remove the mains adapter, batteries and/
or USB cable from the camera.
2. Wipe the outside of the camera with a slightly dampened
cloth.
3. Then let the camera dry completely.

13 MAINTENANCE

The camera is low maintenance. Nevertheless, you should
carry out regular visual checks. Check the camera for damage
before each use
NOTICE
Do not use the camera if it shows visible damage.
530710 | 12 | 2020 | V2
DE
EN
EN
FR
IT
NL
SV
ES
PL
41