Lionelo LO-HUGO Mode D'emploi page 24

Make sure the safety seat has been secured
3.
properly. If it sticks out or moves, repeat
the assembly.
EN
Once you have assembled the seat, make sure
that the safety seat has been secured properly
again:
Hip part of the seatbelt must go through red indicators
1.
under elbow rests on the seat (M-1).
Arm part goes above the elbow rest from the belt
2.
fastening side (M-2).
Arm part of the belt goes through the handle under
3.
the headrest (M-3).
Seatbelts are tense and must not be twisted.
4.
Seatbelt fastening is not under the elbow rest (N).
5.
EN