Checking The Used Time; Locking The Buttons On The Vcr - Sony SVO-1330 Mode D'emploi

Recording

Checking the used time

You can check the length of time the video head has
been used in the USED TIME menu.
1
Press SHIFT v to select 3.SET UP/USED TIME,
then press SHIFT b.
The SET UP menu appears on the screen.
2
Check the head counter.
[ SET UP ]
TAPE T-120
END ALARM END
TAPE END REW
APC ON
CLOCK ADJ 0 1 : 0 0
ON
BUZZER
ON
THREAD CHECK
[ USED TIME ]
HEAD 00005H
3
Press MENU twice to return to the normal display.

Locking the buttons on the VCR

You can lock the buttons on the VCR. This is
convenient if you want to prevent accidental
operations while controlling this VCR with a wired
remote control unit (not supplied). It is also convenient
when you use this VCR in a public place; this protects
the VCR from mishaps caused by other people
touching it.
6
KEY INHIBIT ON/OFF
Set the KEY INHIBIT ON/OFF switch on the VCR to
ON.
"KEY INHIBIT" appears in the VCR's display
window and the buttons on the VCR are locked.
To resume normal operation, set the KEY INHIBIT
ON/OFF switch to OFF.
16
(US)
Head counter
r P
p 0 ( )