Care And Cleaning - Nesco American Harvest BDM-110 Manuel De L'utilisateur

11. After selecting desired settings, start the program using the "Start/Stop" button. The
display will show the time remaining until program is done.
12. Taking out the bread, always use pot holders or oven gloves. Using the handle, turn
to the left to unlock and lift to remove. Hold the bread pan tilted over a cooling rack
and shake lightly until the bread slides out of the bread pan. Do not use any metal
objects that may lead to scratches on the non-stick coating. After removing the
bread, immediately rinse the bread pan with warm water. This prevents the kneading
paddles from sticking to the drive shaft.
13. Let the bread cool for 15-30 minutes before eating. Before cutting bread, make sure
that kneading paddle is not in the loaf.
Tip: Remove the kneading paddle after the last kneading of the dough and the bread
will remain whole when removed from bread pan. To do this, briefly press the Start/Stop
button, to interrupt the baking process or pull the plug out of the wall socket. Open the
appliance lid and take the dough out with floured hands and remove the kneading paddle.
Replace the dough and close the lid. Connect plug back into the electrical outlet and press
the "Start/Stop" button. The program will be resumed.
End of a program - When the baking process has been completed, an audible signal is
heard and the display indicates 0:00. The appliance automatically changes to a warming
mode for up to 1 hour. In this mode, warm air circulates inside the appliance. You can
turn off the warming function by keeping the "Start/Stop" button pressed until audible
signal is heard or remove plug from electrical outlet.

Care and Cleaning

Always remove the power plug from electrical outlet each time and allow the appliance
to cool down. Protect the appliance against splashing water and moisture, as these could
lead to an electrical shock hazard. Please also observe all safety instructions.
Important: The parts and accessories of the appliance should not be washed in a
dishwasher.
Housing, Lid, and Baking area: Remove all particles left behind inside the baking
area using a damp cloth. Wipe the body and lid with a damp cloth. Dry all surfaces
thoroughly.
Bread pan and kneading paddle: The surfaces of the bread pan and kneading paddle
have a non-stick coating do not use any abrasive detergents, or scouring pads. Due
to moisture and vapor the surface of various parts may undergo changes in their
appearance over a period of time. This does not affect the quality or functional
performance of the appliance. Before cleaning, take the bread pan and kneading paddle
out of the baking area. Wipe the outside of the bread pan with a damp cloth and dry
thoroughly.
Never immerse the Housing or Bread pan in water or other liquids. Clean the interior
of the bread pan with warm, soapy water. If the kneading paddle is encrusted and hard
to release, fill the bread pan with hot water for approx. 30 minutes. If the hole in the
kneading paddle is clogged, you can clean it carefully with a wooden skewer. Do not use
any chemical or abrasive cleaners to clean the appliance.
Care and Cleaning Instructions
5